Exclusive: Antec Signature 850W
by Christoph Katzer on May 7, 2008 2:00 AM EST- Posted in
- Cases/Cooling/PSUs
Efficiency
The Signature 850W power supply has great efficiency and it tops most recently tested units, especially with lower input voltages. 87% efficiency with 230VAC is very good and it even stays that high for quite a bit. With 100% and 110% loads, it maintains the same efficiency even though we normally see a significant drop at this point.
There is a reason why this unit has the Bronze 80Plus certification: with 120VAC it still reaches up to 85% efficiency and even stays above 82% most of the time. It can even reach higher grounds with only 90VAC and makes it up to 83% at around 400W. As the graphs show, users of this unit should have at least 150W of continuous power draw; otherwise, it is just not working efficiently enough. With an average power of 300W onwards this unit will have its perfect working environment.
Power Factor Correction
The power factor correction is one of the best we have seen to date. At lower input voltages we see a constant high level that is just not possible, presently, to better. Even Europe can build on a good correction at lower power draw.
Facebook
Twitter
RSS
23 Comments
View All Comments
PeteRoy - Monday, May 12, 2008 - link
Power supplies might be a very critical component in the system but they are also the most boring component.I thought power supplies reviews are only found in unpopular computer websites.
hansmuff - Friday, May 9, 2008 - link
"Looking at performance, we saw voltage drops on the lower voltage rails as well as on the 12V rails. All of the rails perform well within specs but a drop of up to 5% is not small.""The Signature series definitely left its mark today with very good performance"
Huh? If I dish out that much money for a power supply, I will not even consider one that drops 5%. And how can that be called "very good performance"?
This PSU has some good characteristics, but my take-away from your review is "don't bother with this until (1) the voltage drop problem is verified to be fixed and (2) it drops not voltages, but $100 off it's price".
mindless1 - Tuesday, May 13, 2008 - link
There is no reason to reject a power supply for 5% drop. Specs exist for a reason, that the powered components MUST also perform properly within the spec.What do you feel you gain with a PSU that has a hypothetically perfect 0% drop? Absolutely nothing. The drop is even less significant today with fewer and fewer parts directly powered by 12, 5, or 3.3V rails. Instead most now have buck conversion inbetween that can accept far more than 10%, letalone 5% deviation.
I do agree the price is a little excessive, although if someone is spending enough to actually need a PSU best at 400W+ output level, they have spent quite a lot on the rest of their system as well. Many overclocked non-SLI gaming systems stay far below 300W consumption.
deathwalker - Friday, May 9, 2008 - link
This review certainly goes against the tide when it come to my experience with Antec over the last 10 yrs. My experience has led me to the feeling that when I bought a Antec product the results was generally that it was overpriced and it under performed.mongoosesRawesome - Wednesday, May 7, 2008 - link
This seems completely overkill except for maybe triple SLI setups - which are also overkill.A good 500W PSU or even less should be plenty even for even mid/high end setups.
Efficiency is all well and good, but if people end up buying large PSU's which aren't efficient at the lower wattage's it's all just for show.
eetnoyer - Wednesday, May 7, 2008 - link
power supply reviews for less than 5% of people who will ever need them (eg. care)? I would venture to guess that the number of users that are in the market to build a nice HTPC and are looking for a quiet low output power supply is greater than the number of ubersuperultramaxgodofgear power supply users.MrOblivious - Thursday, May 8, 2008 - link
Because no one cares. Seriously. It is the same reason why you see people looking at, reviewing, and talking about a Porsche when less than 5% of people will buy one. People don't read about random run of the mill power supplies so it makes no sense to produce reviews people won't read for the website or the brands themselves. Sorry.strikeback03 - Thursday, May 8, 2008 - link
People might read about the Porsche for fun, but they check Consumer Reports when they are trying to decide between an Accord and a Taurus. In this case I'd guess even fewer people care about the high-end power supply than the high-end car - a power supply isn't that exciting until it powers something else you have.The bigger reason is that the companies that send power supplies for review tend to send their biggest and "best".
MrOblivious - Thursday, May 8, 2008 - link
Those assumptions would be incorrect. I literally have companies begging me to take lower powered products in for review all the time and from the page counts people DO NOT read the lower powered offerings. It really is quite simple.strikeback03 - Friday, May 9, 2008 - link
Well, I suppose Johan could be lying when he states that the companies only prefer to send him big units. And I suppose the companies could be sending people to the comments here to ask in every review of big power supplies for reviews of smaller units.